AE1000Plus: Commercial Telephone Entry System with Access Control – Four Doors

The Nortek Security & Control Family of Brands

AM-SEK: Serial to Ethernet Adapter Kit
Local Programming Addendum
AXNET Installation Guide

The Model AE1000Plus Commercial Telephone Entry System with Access Control – Four Doors is designed for use as a primary access control device for gated communities, parking garages, office buildings, apartments, dormitories, hotels/motels, commercial buildings and recreational facilities.

Housed in a locked, rugged stainless steel faced enclosure, the AE1000Plus features a side-lit 12-key telephone style keypad with bright, easy-to-read graphics, a backlit two-line directory display with programmable welcome message, a built-in microphone, speaker, and provision for an optional Model CCM-1A color CCTV camera. The cabinet is monitored with a magnetic tamper switch.

The four relay output channels can be programmed to control electric door strikes, magnetic locks, door & gate operators, or barrier gates.

The system utilizes hands-free, full duplex telephone communications between visitors and residents for granting access. Complete access control event logging, access time restriction, access location restriction, and administration functions are also available to manage the installation.

For easy programming, the AE1000Plus contains Linear’s built-in browser-based AXNET software. The system can be programmed and maintained from any computer world-wide, without using dedicated computer software. The AE1000Plus is also compatible with Linear’s powerful AccessBase2000 dedicated access control PC software.

The AE1000Plus is network ready. AE1000Plus units can be interconnected with Linear’s AM3Plus and AE2000Plus Telephone Entry Systems through a 3-wire RS-485 or modem network. The AE1000Plus can be used in networks with the legacy AM-3, AE-1000, and AE-2000 Telephone Entry Systems in installations programmed with AccessBase2000 software only.

Two Wiegand inputs are available for connection of 26, 30, or 31 bit Wiegand devices (card readers, etc.). Three sets of PBUS inputs are available for connection to Linear’s line of remote accessories.

Capabilities with AccessBase2000 Programming
Programming through dedicated PC

  • Up to 10,000 cardholders grouped in sets
  • Up to 24 card blocks with up to 1,900 cards each (45,600 total)
  • Up to 20,000 individually enrolled cards
  • Up to 24 transmitter blocks with up to 1,900 transmitters each (45,600 total)
  • Up to 20,000 individually enrolled transmitters
  • Up to 20,000 entry codes for cardholders
  • Up to 20,000 telephone directory codes for cardholders
  • 20,000 event log entries per unit
  • Up to 31 access time zones
  • Up to six PBUS and two Wiegand devices per unit

Capabilities with AXNET Programming
Programming using ANY PC through browser software

  • Up to 2,000 cardholders
  • Up to 24 card blocks with up to 1,600 cards each (38,400 total)
  • Up to 2,000 individually enrolled cards
  • Up to 24 transmitter blocks with up to 1,600 transmitters each (38,400 total)
  • Up to 2,000 individually enrolled transmitters
  • Up to 2,000 key codes
  • Up to 2,000 telephone directory codes
  • 2,500 event log entries per unit
  • Up to 8 access time zones
  • Up to four PBUS and two Wiegand devices per unit

Features

  • Rugged stainless steel enclosure
  • Backlit two-line directory display with programmable display messages; sidelit 12-key telephone style keypad
  • Built-in microphone and speaker
  • Built-in 318 MHz RF receiver
  • Many installation choices: surface, recessed, gooseneck
  • Local or remote programming using a PC and AccessBase2000 or through browser with built-in AXNET software
  • 32 security levels, 32 time zones, 32 door schedules, and 24 holiday schedules
  • Relay auto lock/unlock schedules
  • 13″ W x 16.25″ H x 3.5″ D

Order number: ACP00951

AE1000Plus
Communications: Full Duplex, hands free operation
PROGRAMMING
Telephone Entry: 1-4 digit directory code length, display messages, talk time duration, extended talk time per user
OUTPUTS
Relay: 4 form “C” relays; all can be configured for open/close; all relay contacts have extensive RFI, arc and lightning suppression
RS232: for local computer communications
Modem: for remote programming
Video: BNC connector for optional color camera
DISPLAY
Front Panel: LCD technology, 2 lines by 16 characters
Keypad Lighting: surround LED lighting for the front panel keypad; LEDs remain on at 50% intensity until a key is pressed; once a key is pressed, LEDs illuminate at 100% intensity for a period of 2 minutes
INPUTS
PBUS: 3 sets of inputs for connecting up to 6 proprietary addressable devices
Wiegand: 2 sets of Wiegand inputs for connecting 26, 30, or 31 bit Wiegand devices; each Wiegand input supports two reader LED indicators
RF: Internal 318 MHz super heterodyne receiver with -100 dBm sensitivity; built-in 20dB adjustable attenuator for fine tuning performance; antenna required for transmitters
Request To Exit: 4 normally open inputs; each input assigned to specific relay
LEDs for configuration, status, and troubleshooting
Door Sense 4 normally closed inputs used to monitor the status of the controlled portal to support forced door/propped door alarm; also for auto-relock
 
Power: 12/24 VAC or VDC; 16 VAC transformer included
Operating Temperature: -22° to +149°F (-30° to +65°C)
Clock/Calendar: built-in 24-hour clock/calendar with battery back-up and daylight savings adjustment
Enclosure: 16 gauge powder coated steel cabinet; 16 gauge brushed stainless steel front panel
DIMENSIONS
Case:
13″ W x 16.75″ H x 3.5″ D
Optional Trim Ring Mounting Hole Size: 15″ W x 18.25″ H x 2.75″ D
Accessories for use with the AE1000Plus
Model Description
AM-SEK Serial to Ethernet Adapter Kit
AM-RS232 RS-232 Extender Kit
LINAC-USBS Serial-to-USB Adapter Kit
AM-RPR Remote Proximity Receiver
AM-RRR Remote Radio Receiver
AM-KP Exterior Keypad
RGR Remote Genie Receiver
AM-DPR Dual Proximity Reader – HID Compatible and Linear Format
AM-PC Proximity Card
AM-PT Proximity Tag
CPDM-1 Video Modulator for Access Cameras
AM-CRI Card Reader Interface
AM-KPI Interior Keypad
MGT Gate Safety Edge Transmitter
CCM-1A Color Camera
TR-1000 Trim Ring
EXA-2000 Directional Remote Antenna
EXA-1000 Omni-directional Remote Antenna
GNB-1 Burial Mount Gooseneck
GNC-1 Curb Mount Gooseneck
WOR Wiegand Output Receiver
A2C/DB9 Serial Port Cable
Models compatible with the AE1000Plus
Model Description
MDT-1B 1-Channel Block Coded Visor Transmitter
MDT-2B 3-Channel Block Coded Visor Transmitter
MDT-4B 5-Channel Block Coded Visor Transmitter
MT-1B 1-Channel Block Coded Visor Transmitter
MT-2B 2-Channel Block Coded Visor Transmitter
ACT-31B 1-Channel Block Coded Key Ring Transmitter
ACT-34B 4-Channel Block Coded Key Ring Transmitter
ACT-21B 1-Channel Block Coded Key Ring Transmitter
ACT-31C 1-Channel Custom Block Coded Key Ring Transmitter
ACT-34C 4-Channel Custom Block Coded Key Ring Transmitter
ACT-31D 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
ACT-34D 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
ACT-31DH 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag. Works with certain HID 125 kHz formats.
ACT-34DH 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag. Works with certain HID 125 kHz formats.
ACT-31DHC 1-Channel Custom Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag. Works with certain HID 125 kHz formats.
ACT-34DHC 4-Channel Custom Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag. Works with certain HID 125 kHz formats.

User Manual
Installation Manual
Literature

Dealer Login

JOIN US AT CEDIA 2017

Join us at Booth #4829 during this year’s CEDIA show in San Diego.

READ MORE

NEW FEATURE DEVELOPED

Please visit our Dealer Locator to verify your contact information is accurate. We're constantly making updates to serve you and your customers.

READ MORE

Product Search

Subscribe to Our Newsletter