Radio Controls

The Nortek Security & Control Family of Brands

Multi-Code Radio Controls
Stanley Radio Controls
Delta3 Radio Controls
Megacode Radio Controls
Genie Compatible Radio Controls
Xtended Range Wireless
Radio Control Accessories
Radio Control Sub-Catalog.pdf

MULTI-CODE RADIO CONTROLS

Sets & Transmitters

1011 1011: Multi Single 
Radio receiver and transmitter set, one 109020 receiver, one 308911 transmitter
2022 2022: Multi Double
Radio receiver and transmitter set, one 109020 receiver, two 308911 transmitters
308911 308911: 1-Channel Visor Transmitter 
One-button, one-channel, 9-Volt battery powered transmitter with removable visor clip, 1024 selectable codes
412001 412001: 2-Channel Visor Transmitter 
Two-button, two-channel, 9-Volt battery powered transmitter with removable visor clip, each button can send any of the 1024 selectable codes
414001 414001: 4-Channel Visor Transmitter 
Four-button, four-channel, 9-Volt battery powered transmitter with removable visor clip, each button can send any of 256 selectable codes
306010 306010: 1-Channel Key Ring Transmitter 
Miniature slim line single-button one-channel key ring transmitter, 12-volt battery powered, test/operate LED, 1024 selectable codes
308301 308301: 2-Channel Key Ring Transmitter
Miniature slim line two-button two-channel key ring transmitter, 12-volt battery powered, test/operate LED, each button can send any of the 1024 selectable codes
307010 307010: 1-Channel Key Ring Transmitter
Micro slim line one-button one-channel key ring transmitter, 12-volt battery powered, test/operate LED, 1024 selectable codes

back to top

Multi-Code Keypad, Safety Edge Transmitter & Receivers

420001 420001: Keypad Transmitter 
Wireless keypad transmitter, 12-button alphanumeric keypad, 4-digit PIN code access, tamper-resistant, weatherproof, 9-volt battery powered, 1024 selectable transmitter codes
302210 302210: Safety Edge Transmitter 
Single-channel transmitter that connects to a safety edge sensor for obstacle detection, 9-volt battery powered, 1024 selectable codes
109020 109020: 1-Channel Receiver 
Single-channel 24 VAC powered receiver with connection lugs for direct attachment to three-terminal garage door operators
109920 109920: 1-Channel, 110V, Gate Receiver 
Single-channel, 300 MHz Multi-Code, 110-volt powered gate operator receiver with transformer
109950 109950: 1-Channel, 12-24V, Gate Receiver 
Single-channel, dual-frequency (300 MHz Multi-Code & 310 MHz Stanley), 12-24 volt DC or AC powered gate operator receiver
302850 302850: 2-Channel, 12-24V, Gate Receiver 
Two-channel, dual-frequency (300 MHz Multi-code & 310 MHz Stanley), 12-24 volt DC or AC powered gate operator receiver
302101 302101: 2-Channel, Heavy-Duty Gate Receiver 
Two-channel, Heavy-Duty (two 1-amp Form “C” relays), 24 VAC powered gate operator receiver in a rugged NEMA enclosure

back to top

STANLEY COMPATIBLE RADIO CONTROLS

105015 105015: 1-Channel Visor Transmitter
Single-channel visor transmitter, 9-volt battery powered, test/operate LED, 1024 selectable codes, visor clip included, Stanley compatible
308913 308913: 1-Channel Visor Transmitter 
One-button, one-channel, 9-Volt battery powered transmitter with removable visor clip, 1024 selectable codes, Stanley compatible
109410 109410: 2-Channel Visor Transmitter 
Two-channel visor transmitter, 9-volt battery powered, test/operate LED, visor clip included, each button can send any of the 1024 selectable codes, Stanley compatible
109710 109710: 4-Channel Visor Transmitter 
Four-channel visor transmitter, 9-volt battery powered, test/operate LED, visor clip included, 512 selectable codes, Stanley compatible
108210 108210: 1-Channel Key Ring Transmitter 
Micro slim line one-button one-channel key ring transmitter, 12-volt battery powered, test/operate LED, 1024 selectable codes, Stanley compatible
308302 308302: 2-Channel Key Ring Transmitter 
Miniature slim line two-button two-channel key ring transmitter, 12-volt battery powered, test/operate LED, each button can send any of the 1024 selectable codes, Stanley compatible
298601 298601: Wireless Keypad 
Wireless keypad transmitter, 12-button alphanumeric keypad, 4-digit PIN code access, tamper-resistant, weatherproof, 9-volt battery powered, 1024 selectable transmitter codes, Stanley compatible
105104 105104: Gate Safety Edge Transmitter 
Single-channel transmitter that connects to a safety edge sensor for obstacle detection, 9-volt battery powered, 1024 selectable codes, Stanley compatible
309013 309013: 1-Channel Receiver 
Single-channel 24 VAC powered receiver with connection lugs for direct attachment to three-terminal garage door operators, Stanley compatible
109950 109950: 1-Channel, 12-24V, Gate Receiver 
Single-channel, dual-frequency (300 MHz Multi-Code & 310 MHz Stanley), 12-24 volt DC or AC powered gate operator receiver
302850 302850: 2-Channel, 12-24V, Gate Receiver 
Two-channel, dual-frequency (300 MHz Multi-code & 310 MHz Stanley), 12-24 volt DC or AC powered gate operator receiver

back to top

DELTA3 RADIO CONTROLS

Sets, Transmitters, Keypad & Safety Edge Transmitter

DS DS: Delta Single 
24-volt, single-channel, three-terminal Delta-3 receiver, 256 selectable codes, with one single-button DT transmitter
DD DD: Delta Double
24-volt, single-channel, three-terminal Delta-3 receiver, 256 selectable codes, with two single-button DT transmitters
DT DT: 1-Channel Visor Transmitter 
One-button, one-channel, 9-Volt battery powered visor transmitter with removable visor clip, 256 selectable codes
DT-2A DT-2A: 2-Channel Visor Transmitter 
Two-button, two-channel, 9-Volt battery powered visor transmitter with removable visor clip, 128 selectable codes
DT-4A DT-4A: 4-Channel Visor Transmitter 
Four-button, four-channel, 9-Volt battery powered visor transmitter with removable visor clip, 64 selectable codes
DT-3+1 DT-3+1: 4-Channel Common Gate Access Transmitter 
Four-button, four-channel, 9-Volt battery powered visor transmitter with removable visor clip, 256 selectable codes for button #1, 64 selectable codes for buttons #2, 3, & 4
DTKP DTKP: Keypad Transmitter 
Surface or gooseneck mount wireless keypad for indoor/outdoor applications, built-in transmitter and antenna, keystroke lockout timer, keypad lighting, 9-volt battery powered, transmits any of the 256 codes
MINI-T MINI-T: 1-Channel Key Ring Transmitter 
Miniature key ring transmitter, black case, white button, key ring supplied, test/operate LED, 256 selectable codes
DTG DTG: Safety Edge Transmitter
Single-channel, 9-volt battery powered gate edge obstacle transmitter, connects to safety edge sensor, 256 selectable codes

back to top

Delta-3 Receivers

DR DR: 1-Channel Receiver 
24-volt, single-channel, three-terminal Delta-3 receiver, 256 selectable codes
DRA DRA: 1-Channel, 12-volt, Receiver 
12-volt, single-channel, Delta-3 receiver, 256 selectable codes, Form “C” relay output, wire leads for power connection
DR-2 DR-2: 2-Channel Receiver 
24-volt, two-channel, three-terminal Delta-3 receiver, 128 selectable codes, second channel has Form “C” relay output, 15-foot wire leads for connection to second operator
DR-4 DR-4: 4-Channel Receiver 
24-volt, four-channel receiver with Form “C” relay outputs for residential or commercial applications, can be used for Up, Down, and Stop commercial operator control, 64 selectable codes
DR4-12 DR4-12: 4-Channel, 12-volt, Receiver
12-volt, four-channel receiver with Form “C” relay outputs for residential or commercial applications, can be used for Up, Down, and Stop commercial operator control, 64 selectable codes
DRQP DRQP: 1-Channel Gate Receiver 
24-volt, single-channel, high-gain Delta-3 receiver, 256 selectable codes, Form “C” relay output, wire leads for power connection, Type “F” connector for local or remote antenna, 9-inch local antenna included
GRD GRD: 1-Channel Gate Receiver 
12-30 volt, single-channel, Delta-3 gate receiver, 256 selectable codes, Form “A” relay output, wire leads for power and output connections, Type “F” connector for local or remote antenna, 9-inch local antenna with 3-foot cable and bulkhead connector included
GRD-2 GRD-2: 2-Channel Gate Receiver 
12-30 volt, two-channel, Delta-3 gate receiver, 256 selectable codes for each channel, two Form “A” relay outputs, wire leads for power and output connections, Type “F” connector for local or remote antenna, 9-inch local antenna with 3-foot cable and bulkhead connector included

back to top

MEGACODE RADIO CONTROLS

Transmitters

MCT-1 MCT-1: 1-Channel Visor Transmitter 
One-button, 9-Volt battery powered visor transmitter with removable visor clip, MegaCode format
MCT-11 MCT-11: 1-Channel Visor Transmitter 
One-button, battery (two type 2032) powered visor transmitter with removable two-position visor clip, MegaCode format
MCT-2 MCT-2: 2-Channel Visor Transmitter 
Two-button, 9-Volt battery powered visor transmitter with removable visor clip, MegaCode format
MCT-3 MCT-3: 3-Channel Visor Transmitter 
Three-button, battery (two type 2032) powered visor transmitter with removable two-position visor clip, MegaCode format
MDT-1A MDT-1A: 1-Channel Visor Transmitter 
Two-button, one-channel portable transmitter with high visibility LED supplied with a visor clip, MegaCode format
MDT-2A MDT-2A: 3-Channel Visor Transmitter 
Three-button, three-channel portable transmitter with high visibility LED, supplied with a visor clip, MegaCode format
MDT-4A MDT-4A: 5-Channel Visor Transmitter 
Five-button, five-channel portable transmitter with high visibility LED, supplied with a visor clip, MegaCode format

back to top

MegaCode Transmitters, Keypad & Gate Safety Edge Transmitter

ACT-21A ACT-21A: 1-Channel Key Ring Transmitter 
Single-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
ACT-22A ACT-22A: 3-Channel, Key Ring Transmitter 
Three-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
MDTK MDTK: Keypad Transmitter 
Surface mount keyless entry transmitter for indoor/outdoor applications, 9-volt battery powered, backlit keys, one to six digit entry codes, operates MegaCode receivers
MDKP MDKP: Exterior Wireless Keypad 
Surface or gooseneck mount wireless keypad for indoor/outdoor applications, built-in transmitter and antenna, keystroke lockout timer, keypad lighting, 9-volt battery powered, MegaCode format
MGT MGT: Gate Safety Edge Transmitter 
Supervised gate safety edge transmitter, connects to safety edge sensor, sends obstacle signal to access control receiver, battery powered with two 2450 lithium coin cells, MegaCode format

back to top

MegaCode Receivers

MDR MDR: 1-Channel Receiver 
24-volt, single-channel, three-terminal receiver, 10 code capacity, MegaCode format
MDR-2 MDR-2: 2-Channel Receiver 
24-volt, two-channel, three-terminal receiver, 2nd channel has Form “C” relay output, 10 code capacity, MegaCode format
MDR/U MDR/U: 1-Channel Plug-in Receiver 
Single-channel plug-in receiver with one Form “A” relay output for residential or commercial applications, plugs directly into AC outlet, UL Listed, over 1 million codes
MDRG MDRG: 1-Channel Gate Receiver 
24-volt, single-channel, three-terminal receiver, Type “F” connector for local or remote antenna, 9-inch local antenna included, 40 code capacity, MegaCode format
MGR MGR: 1-Channel Gate Receiver 
12-30 volt, single-channel, gate receiver, Form “A” relay output, wire leads for power and output connections, Type “F” connector for local or remote antenna, 9-inch local antenna with 3-foot cable and bulkhead connector included, 40 code capacity, MegaCode format
MGR-2 MGR-2: 2-Channel Gate Receiver 
12-30 volt, two-channel, gate receiver, two Form “A” relay outputs, wire leads for power and output connections, Type “F” connector for local or remote antenna, 9-inch local antenna with 3-foot cable and bulkhead connector included, 40 code capacity, MegaCode format
SMDRG SMDRG: 1-Channel, Gate Receiver 
24-volt, single-channel high-gain receiver with one Form “C” relay output for residential or commercial gate control applications, Type “F” external antenna connector, 40 code capacity, MegaCode format

back to top

MegaCode Factory Block Coded Transmitters

MT-1B MT-1B: 1-Channel Block Coded Visor Transmitter  
Block coded one-button, one-channel portable transmitter with LED supplied with a visor clip, MegaCode format
MT-2B MT-2B: 2-Channel Block Coded Visor Transmitter 
Block coded two-button, two-channel portable transmitter with LED supplied with a visor clip, MegaCode format
ACT-31B ACT-31B: 1-Channel Block Coded Key Ring Transmitter
Block coded one-button, one-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
ACT-34B ACT-34B: 4-Channel Block Coded Key Ring Transmitter 
Block coded four-button, four-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
ACT-31D ACT-31D: 1-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
Block coded one-button, one-channel transmitter with built-in proximity tag, supplied with a quick-disconnect key ring, MegaCode format
ACT-31DH ACT-31DH: 1-Channel Factory Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
Factory Block coded one-button, one-channel transmitter with built-in 26-bit Wiegand interoperable with certain HID® 125-kHz proximity card formats, proximity tag, supplied with a quick-disconnect key ring, MegaCode format
ACT-31DHC ACT-31DHC: 1-Channel Custom Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag
Custom Block coded one-button, one-channel transmitter with built-in 26 bit Wiegand interoperable with certain HID® 125-kHz proximity card formats, proximity tag, supplied with a quick-disconnect key ring, MegaCode format
ACT-34D ACT-34D: 4-Channel Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag 
Block coded four-button, four-channel transmitter with built-in proximity tag, supplied with a quick-disconnect key ring, MegaCode format
ACT-34DH ACT-34DH: 4-Channel Factory Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag 
Factory Block coded four-button, four-channel transmitter with built-in 26-bit Wiegand interoperable with certain HID® 125 kHZ proximity card formats, proximity tag, supplied with a quick-disconnect key ring, MegaCode format
ACT-34DHC ACT-34DHC: 4-Channel Custom Block Coded Key Ring TRANS PROX Transmitter & Proximity Tag 
Custom Block coded four-button, four-channel transmitter with built-in 26-bit Wiegand interoperable with certain HID® 125 kHZ proximity card formats, proximity tag, supplied with a quick-disconnect key ring, MegaCode format

back to top

MegaCode Custom* Block Coded Transmitters
Available in factory programmed blocks of transmitters with your choice of starting block code number.

MDT-1B MDT-1B: 1-Channel Block Coded Visor Transmitter 
Block coded two-button, one-channel portable transmitter with high visibility LED, supplied with a visor clip, MegaCode format
MDT-2B MDT-2B: 3-Channel Block Coded Visor Transmitter 
Block coded three-button, three-channel portable transmitter with high visibility LED, supplied with a visor clip, MegaCode format
MDT-4B MDT-4B: 5-Channel Block Coded Visor Transmitter 
Block coded five-button, five-channel portable transmitter with high visibility LED, supplied with a visor clip, MegaCode format
ACT-21B ACT-21B: 1-Channel Block Coded Key Ring Transmitter  
Block coded single-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
ACT-22B ACT-22B: 3-Channel Block Coded Key Ring Transmitter
Block coded three-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
ACT-31C ACT-31C: 1-Channel Custom Block Coded Key Ring Transmitter 
Custom block coded one-button, one-channel transmitter supplied with a quick-disconnect key ring, MegaCode format
ACT-34C ACT-34C: 4-Channel Custom Block Coded Key Ring Transmitter 
Custom block coded four-button, four-channel transmitter supplied with a quick-disconnect key ring, MegaCode format

back to top

GENIE COMPATIBLE RADIO CONTROLS

GT-30 GT-30: 3-Channel Genie Compatible Visor Transmitter 
Three-button, three-channel rolling code visor transmitter with LED supplied with a visor clip for use with Genie receivers and Linear’s RGR receiver
GT-31 GT-31: 3-Channel Genie Compatible Key Ring Transmitter 
Three-button, three-channel rolling code key ring transmitter with LED supplied with a quick-disconnect key ring for use with Genie receivers and Linear’s RGR receiver

back to top

XTENDED RANGE WIRELESS

Mid-Range Transmitters

XT-1 XT-1: 1-Channel Stationary Mid-range Transmitter 
10 watt 27.255 MHz mid-range transmitter with terminals for external contacts, up to ten miles line of sight range, can send hourly status signals, uses T-1224DC power supply, weather resistant case, antenna required
XT-4 XT-4: 4-Channel Stationary Mid-range Transmitter 
10 watt 27.255 MHz mid-range transmitter with terminals for external contacts, up to ten miles line of sight range, can send hourly status signals, uses T-1224DC power supply, weather resistant case, antenna required
XT-1H XT-1H: 1-Channel Handheld Mid-range Transmitter 
One-button, single-channel, portable handheld 2 watt 27.255 MHz mid-range transmitter with rubber antenna, up to two miles line of sight range, belt clip included
XT-2H XT-2H: 2-Channel Handheld Mid-range Transmitter 
Two-button, two-channel, portable handheld 2 watt 27.255 MHz mid-range transmitter with rubber antenna, up to two miles line of sight range, two-button lockout option, belt clip included
XT-4H XT-4H: 4-Channel Handheld Mid-range Transmitter 
Four-button, four-channel, portable handheld 2 watt 27.255 MHz mid-range transmitter with rubber antenna, up to two miles line of sight range, belt clip included

back to top

Mid-Range Receivers & Accessories

XR-1 XR-1: 1-Channel Mid-range Receiver 
Supervised single-channel mid-range 27.255 MHz receiver, weather resistant case, antenna required
XR-4 XR-4: 4-Channel Mid-range Receiver 
Supervised four-channel mid-range 27.255 MHz receiver, weather resistant case, antenna required
XR-16 XR-16: 16-Channel Mid-range Receiver 
Supervised 16-channel mid-range 27.255 MHz receiver, antenna required
ANT-1A ANT-1A: 7-inch Mid-range Antenna
Rubber antenna works with XT and XR series 27.255 MHz mid-range transmitters and receivers, includes CON-180A connector, add CON-90A connector for right angle mounting
ANT-2 ANT-2: 3-foot Mid-range Antenna
Works with XT and XR series 27.255 MHz mid-range transmitters and receivers, 18 feet of coax cable included, U-bolt included for post mounting
CON-90A CON-90A: Right Angle Antenna Connector 
Right angle antenna connector for ANT-1A, use with CON-180A, works with XT and XR series 27.255 MHz mid-range transmitters and receivers
T-124.8DC T-124.8DC: Power Supply 12 VDC @ 400 mA 
Recommended power supply for XR series mid-range receivers
T-1224DC T-1224DC: Power Supply 12 VDC @ 2 Amps 
Recommended power supply for XT series mid-range transmitters

RADIO CONTROLS ACCESSORIES

Wiring Harnesses, Transformers & Antennas

109201 109201: Wiring Harness
Three-position terminal strip kit for connection of a three-terminal receiver to a two-terminal operator, wire leads with spade lugs and 24 VAC transformer included
109207 109207: Wiring Harness 
Three-position wiring kit for connection of a three-terminal receiver with slip-on lugs to a two-terminal operator, wire leads with spade lugs and 24 VAC transformer included
109206 109206: 3-Wire Adapter 
Three-conductor cable adapter for connecting a three-terminal receiver with slip-on lugs to a three-terminal operator when the operator terminals are not accessable for direct mounting of the receiver or where the terminal sequence doesn’t conform to the DORCMA standard, 3-foot cable with spade lugs
TF524 TF524: 24-volt Transformer 
120 VAC to 24-volt VAC @ 50 mA transformer for powering door and gate operator receivers
106603 106603: Remote Whip Antenna 
Remote antenna kit for receivers equipped with a Type “F” antenna connector, whip antenna, bracket, and 15-foot coax cable included
106604 106604: Local Antenna 
9-inch solid wire whip antenna with Type “F” connector and soft plastic connector boot
WHIP WHIP: Rigid Local Antenna 
9-inch solid wire whip antenna with Type “F” connector and soft plastic connector boot
EXA-1000 EXA-1000: Omni-directional Remote Antenna 
External high-gain omni-directional antenna with 5-foot coax and Type “F” connector, compatible with AE-500, AE1000Plus, AE2000Plus, DXR-702, DX-12, RE-2N, RE-2SS, AP-5, WOR, RGR, AM-RRR
EXA-2000 EXA-2000: Directional Remote Antenna 
External high-gain directional antenna with 10-foot coax and Type “F” connector, compatible with AE-500, AE1000Plus, AE2000Plus, RE-2N, RE-2SS, AP-5, WOR, RGR, AM-RRR

back to top

Batteries, Visor Clips & Field Tester

9VCZB 9VCZB: 9-volt Carbon-zinc Battery 
9-volt carbon-zinc replacement battery for transmitters
9VAB 9VAB: 9-volt Alkaline Battery 
9-volt alkaline replacement battery for transmitters
12VAB 12VAB: 12-volt Alkaline Battery 
Miniature GP-23 type 12-volt alkaline replacement battery for transmitters
2032 2032: 3-Volt Lithium Battery 
Coin-cell type 3-volt lithium replacement battery for transmitters
1616 1616: 3-Volt Lithium Battery
Coin-cell type 3-volt lithium replacement battery for transmitters
2450 2450: 3-Volt Lithium Battery 
Coin-cell type 3-volt lithium replacement battery for transmitters
FT-1 FT-1: Radio Interference Field Tester 
Portable test instrument that monitors 318 MHz frequency, audible diagnostic output, RF activity LED, 9-volt battery powered
DVC DVC: Delta-3 Visor Clip 
Replacement spring steel visor/belt clip for Delta-3 DT style transmitters
MVC MVC: Multi-Code Visor Clip 
Visor clip for Multi-Code transmitters
SVC SVC: Stanley Visor Clip 
Visor clip for Stanley 105015 transmitters

back to top

Specifications subject to change without notice.

Dealer Login

JOIN US IN 2017

Nortek Security & Control is presenting at a number of trade shows this year. Please join us at a show near you!

READ MORE

NEW FEATURE DEVELOPED

Please visit our Dealer Locator to verify your contact information is accurate. We're constantly making updates to serve you and your customers.

READ MORE

Product Search

Subscribe to Our Newsletter